BluePrint Engines PSLS3763CTFKB GM LS 376 CID ProSeries 530 HP Fuel Injected Black Deluxe
This BluePrint Engines PSLS3763CTFKB GM LS 376 ProSeries Engine produces 530 horsepower and 495 ft./lbs. of torque. This engine comes equipped with a Holley Terminator X MAX Gen IV Complete ECU/Harness EFI System!
It comes with LS3 aluminum cylinder heads, a hydraulic roller camshaft as well as a Drive-By-Wire Throttle Body. It also has Hypereutectic pistons as well as a nodular iron crankshaft, and features a 10.7:1 compression ratio.
This engine comes with a Black Front Accessory Drive with a water pump, alternator, A/C compressor, and also a power steering pump.
The 6-Bolt Main Cast Iron LSX Style block features increased deck thickness and strength webbing, extended cylinder skirts, priority main oiling, as well as improved water jacket design and OEM LS3 front and rear covers. This engine also features a 58x reluctor wheel and 4x cam sensor. A knock sensor provision is on the side of the block, and the cam sensor is located in the timing cover.
This engine also includes a LS Swap oil pan, GM Plastic Intake Manifold, Fuel Injectors and Rail (utilizing EV6 type injectors). Coil Packs, spark plugs and wires, water pump and a harmonic balancer are also included.
BluePrint Engines recommends 91 octane gasoline. This engine comes with an industry-leading 30-Month/50,000 mile warranty!
Manufactured and also Machined in the USA!
BluePrint Engines PSLS3763CTFKB GM LS 376 ProSeries Engine Specs:
- Engine Family: GM LS
- Displacement: 376 CID
- Horsepower: 530
- Torque Ft./Lbs: 495
- Compression Ratio: 10.7:1
- Block Material: Cast Iron (LSX Style)
- Bore: 4.0662 in.
- Stroke: 3.622 in.
- Connecting Rods: 6.125 in. with 150,000 PSI Bolts
- Piston Type: Hypereutectic
- Cylinder Head Material: Aluminum
- Cylinder Head Chamber Volume: 69cc
- Intake Valve Size: 2.165 in.
- Exhaust Valve Size: 1.590 in.
- Intake Runner Size: 259cc
- Exhaust Runner Size: 102cc
- Crankshaft Material: Nodular Iron
- Engine Balance: Internal
- Rear Main Seal Type: 1-piece
- Camshaft Style: Hydraulic Roller
- Valve Lift Intake: .612
- Valve Lift Exhaust: .585
- Intake Duration at .050": 225
- Exhaust Duration at .050": 238
- Lobe Separation: 113
- Quantity: Sold individually
Notes: Air Intake Kit BPPLS01013 is recommended to ensure correct MAF calculations and Dyno calibration are maintained. The Low Profile Front Accessory Drive fits many vehicles, however it is the customer's responsibility to accurately measure and confirm fitment.
BluePrint Engines offers short blocks and long blocks, as well as turnkey engine assemblies in all of the popular GM, Ford, and Mopar configurations. They Dyno Test every engine, assuring an excellent choice for you as well as your customer.
More Images
BluePrint Engines PSLS3763CTFKB GM LS 376 CID ProSeries 530 HP Fuel Injected Black Deluxe
This BluePrint Engines PSLS3763CTFKB GM LS 376 ProSeries Engine produces 530 horsepower and 495 ft./lbs. of torque. This engine comes equipped with a Holley Terminator X MAX Gen IV Complete ECU/Harness EFI System!
It comes with LS3 aluminum cylinder heads, a hydraulic roller camshaft as well as a Drive-By-Wire Throttle Body. It also has Hypereutectic pistons as well as a nodular iron crankshaft, and features a 10.7:1 compression ratio.
This engine comes with a Black Front Accessory Drive with a water pump, alternator, A/C compressor, and also a power steering pump.
The 6-Bolt Main Cast Iron LSX Style block features increased deck thickness and strength webbing, extended cylinder skirts, priority main oiling, as well as improved water jacket design and OEM LS3 front and rear covers. This engine also features a 58x reluctor wheel and 4x cam sensor. A knock sensor provision is on the side of the block, and the cam sensor is located in the timing cover.
This engine also includes a LS Swap oil pan, GM Plastic Intake Manifold, Fuel Injectors and Rail (utilizing EV6 type injectors). Coil Packs, spark plugs and wires, water pump and a harmonic balancer are also included.
BluePrint Engines recommends 91 octane gasoline. This engine comes with an industry-leading 30-Month/50,000 mile warranty!
Manufactured and also Machined in the USA!
BluePrint Engines PSLS3763CTFKB GM LS 376 ProSeries Engine Specs:
- Engine Family: GM LS
- Displacement: 376 CID
- Horsepower: 530
- Torque Ft./Lbs: 495
- Compression Ratio: 10.7:1
- Block Material: Cast Iron (LSX Style)
- Bore: 4.0662 in.
- Stroke: 3.622 in.
- Connecting Rods: 6.125 in. with 150,000 PSI Bolts
- Piston Type: Hypereutectic
- Cylinder Head Material: Aluminum
- Cylinder Head Chamber Volume: 69cc
- Intake Valve Size: 2.165 in.
- Exhaust Valve Size: 1.590 in.
- Intake Runner Size: 259cc
- Exhaust Runner Size: 102cc
- Crankshaft Material: Nodular Iron
- Engine Balance: Internal
- Rear Main Seal Type: 1-piece
- Camshaft Style: Hydraulic Roller
- Valve Lift Intake: .612
- Valve Lift Exhaust: .585
- Intake Duration at .050": 225
- Exhaust Duration at .050": 238
- Lobe Separation: 113
- Quantity: Sold individually
Notes: Air Intake Kit BPPLS01013 is recommended to ensure correct MAF calculations and Dyno calibration are maintained. The Low Profile Front Accessory Drive fits many vehicles, however it is the customer's responsibility to accurately measure and confirm fitment.
BluePrint Engines offers short blocks and long blocks, as well as turnkey engine assemblies in all of the popular GM, Ford, and Mopar configurations. They Dyno Test every engine, assuring an excellent choice for you as well as your customer.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This BluePrint Engines PSLS3763CTFKB GM LS 376 ProSeries Engine produces 530 horsepower and 495 ft./lbs. of torque. This engine comes equipped with a Holley Terminator X MAX Gen IV Complete ECU/Harness EFI System!
It comes with LS3 aluminum cylinder heads, a hydraulic roller camshaft as well as a Drive-By-Wire Throttle Body. It also has Hypereutectic pistons as well as a nodular iron crankshaft, and features a 10.7:1 compression ratio.
This engine comes with a Black Front Accessory Drive with a water pump, alternator, A/C compressor, and also a power steering pump.
The 6-Bolt Main Cast Iron LSX Style block features increased deck thickness and strength webbing, extended cylinder skirts, priority main oiling, as well as improved water jacket design and OEM LS3 front and rear covers. This engine also features a 58x reluctor wheel and 4x cam sensor. A knock sensor provision is on the side of the block, and the cam sensor is located in the timing cover.
This engine also includes a LS Swap oil pan, GM Plastic Intake Manifold, Fuel Injectors and Rail (utilizing EV6 type injectors). Coil Packs, spark plugs and wires, water pump and a harmonic balancer are also included.
BluePrint Engines recommends 91 octane gasoline. This engine comes with an industry-leading 30-Month/50,000 mile warranty!
Manufactured and also Machined in the USA!
BluePrint Engines PSLS3763CTFKB GM LS 376 ProSeries Engine Specs:
- Engine Family: GM LS
- Displacement: 376 CID
- Horsepower: 530
- Torque Ft./Lbs: 495
- Compression Ratio: 10.7:1
- Block Material: Cast Iron (LSX Style)
- Bore: 4.0662 in.
- Stroke: 3.622 in.
- Connecting Rods: 6.125 in. with 150,000 PSI Bolts
- Piston Type: Hypereutectic
- Cylinder Head Material: Aluminum
- Cylinder Head Chamber Volume: 69cc
- Intake Valve Size: 2.165 in.
- Exhaust Valve Size: 1.590 in.
- Intake Runner Size: 259cc
- Exhaust Runner Size: 102cc
- Crankshaft Material: Nodular Iron
- Engine Balance: Internal
- Rear Main Seal Type: 1-piece
- Camshaft Style: Hydraulic Roller
- Valve Lift Intake: .612
- Valve Lift Exhaust: .585
- Intake Duration at .050": 225
- Exhaust Duration at .050": 238
- Lobe Separation: 113
- Quantity: Sold individually
Notes: Air Intake Kit BPPLS01013 is recommended to ensure correct MAF calculations and Dyno calibration are maintained. The Low Profile Front Accessory Drive fits many vehicles, however it is the customer's responsibility to accurately measure and confirm fitment.
BluePrint Engines offers short blocks and long blocks, as well as turnkey engine assemblies in all of the popular GM, Ford, and Mopar configurations. They Dyno Test every engine, assuring an excellent choice for you as well as your customer.
